Automatic high-speed inspection Laminate Film rewinding Machine common fault solutions
- Categories:rewinding machine
- Author:
- Origin:
- Time of issue:2022-05-17
- Views:0
(Summary description)Automatic high-speed inspection Laminate Film rewinding Machine can be divided into two categories: instant coating type laminating machine and pre-coating type laminating machine.
Automatic high-speed inspection Laminate Film rewinding Machine common fault solutions
(Summary description)Automatic high-speed inspection Laminate Film rewinding Machine can be divided into two categories: instant coating type laminating machine and pre-coating type laminating machine.
- Categories:rewinding machine
- Author:
- Origin:
- Time of issue:2022-05-17
- Views:0
Automatic high-speed inspection Laminate Film rewinding Machine can be divided into two categories: instant coating type laminating machine and pre-coating type laminating machine. It is a special equipment used for paper, board and film lamination. After being pressed by a rubber roller and a heating roller, it is combined to form a paper-plastic product.
What should I do if there is a problem with the Automatic high-speed inspection Laminate Film rewinding Machine? What are the common faults of laminators?
The main reasons for this problem are:
(1) The printed product is too thin: try to prevent the thin paper from being laminated.
(2) Unbalanced tension: adjust the film tension to make it balance
(3) The compound pressure is too large: appropriately reduce the compound pressure.
(4) The temperature is too high: decrease the composite temperature.
(5) Excessive film tension: Excessive film tension will cause the film to stretch and deform, and after the product is cut and the external force is removed, the film will return to its original state, causing the product to bend to the side of the film. The treatment method is: adjust the screwing depth of the membrane expansion screw to reduce the braking force.
(6) The winding pulling force is too large: The winding pulling force is too large, which will deform the film and the printed product together, but the deformation amount is different. After the external force is removed, the item will bend to the side of the paper, especially for thin paper. The treatment method is to reduce the friction of the winding power wheel.
(7) High ambient humidity: After the coated products with high moisture content are sufficiently dry, the paper will be dehumidified and deformed, causing the product to bend to the side of the paper. The treatment method is to control the humidity of the workshop.
(8) The boring time is short: the boring time is short. If the coated product is not sufficiently dry, it will bend. The solution is to extend the boring moment.
Scan the QR code to read on your phone
Recommended News
Contact Us
An enterprise that integrates design, production, processing, and sales, and specializes in the production of intelligent machinery. Have modern production management experience and professional technical personnel.

Mobile Site

WeChat Account
Copyright © 2021 Guangdong Hongsheng Technology Co., Ltd. Power by : www.300.cn 粤ICP备2021090389号 SEO标签