The high-speed inspection and rewinder must be operated by fixed personnel, who can master the startup and bag making procedures, and can simply debug the instrument and change parameters; the mechanical instrument debugger needs to strictly require the manufacturer, and be proficient in instrument performance, working procedures, operation methods, working conditions, Troubleshooting and handling of common faults; it is strictly forbidden to operate computer instruments without personnel. The daily basic cleaning of the equipment needs to keep the inside and outside of the computer instrument box clean and dry; regularly check whether the terminals are loose or fall off. Make sure the circuit and air path are clear.

Basic cleaning of high-speed inspection rewinders includes:
1. After the equipment is shut down, the metering parts, such as sugar, Banlangen granules, salt, etc., should be cleaned in time. For packaging, it must be ensured that the unloading tray and turntable are cleaned every shift to prevent corrosion.
2. The body of the heat sealing machine should be cleaned frequently to make the texture of the equipment seal clear.
3. The photoelectric follower light-emitting head, that is, the electric eye, should also be cleaned regularly to ensure that the cursor following error is small.
4. The material scattered on the tray should be cleaned up in time to keep the parts clean.
5. Regularly clean the dust in the electric control cabinet to avoid faults such as poor contact. The newly installed high-speed inspection rewinder needs to check the fastening transmission and moving parts within one week of use, and refuel for maintenance. After that, regular inspections and maintenance are required every month.