Before the automatic slitting machine equipment is put into operation, check whether each working position is properly adjusted, and the parts that need to be lubricated should be filled with lubricating grease in advance. Check that the knives are sharp. After the automatic slitting machine is all normal, it can be run empty first, check whether there is any abnormality, and input the order to be processed in advance into the computer for ordering inspection; after the automatic slitting machine is put into operation, the maximum value of the equipment should be adjusted in time according to the production situation. In the best working state, ensure that the indentation of the slitting machine is moderate, the slitting is free of burrs, and the trimming positions on both sides are appropriate.

To ensure the smooth feeding and discharging of the cross-cutting machine and the accurate cutting length, it is also necessary to monitor the operation of the cross-cutting machine connected with production management from time to time to prevent paper jams and defective products; Dust and paper scraps, check the tool and the sharpening wheel, drain the water in the oil-water high device and the gas storage tank, and check whether there is any abnormality in the running part. Then, cut off the power supply according to the operation requirements of the manual, and maintain the computer operating system.