• Categories:Industry News
• Author:
• Origin:
• Time of issue:2020-01-05
• Views:1

(Summary description)In addition to classic statistical analysis, time domain and frequency domain analysis, time series analysis and parameter identification models, as well as the latest developments in refining technology, frequency, resonance demodulation analysis and cepstrum analysis, it also analyzes and processes the three-dimensional vibration signal of the high-speed slitting machine Holographic spectrum analysis, axial trajectory analysis, short-time Fourier transform based on assumptions and non-stationary signals, wing distribution and wavelet transform.

Through the existing microcomputer-based real-time online monitoring and fault diagnosis system and portable monitoring and analysis system, the development of virtual instrument technology, fault diagnosis equipment and instruments is analyzed, and the development of virtual instrument technology is analyzed. Turn on the power of the slitter to ensure that the voltage, current and hydraulic system are correct and stable. Before the slitter equipment is ready for operation, all personnel must notify the leaving equipment to ensure the personal safety of the personnel.

When checking. Do not touch the slitting machine to avoid personal injury. During the operation, avoid cutting and cutting the core of each drum with a knife or hard object. The first package: Before the equipment is put into use, it must be ensured that the position is adjusted and lubricated. Check whether the tool is sharp.

After normal operation, the engine of the slitter will run for free, check whether there is any abnormality, and then enter the order in advance. After work, the equipment should be adjusted in time according to the production conditions under the best working conditions to ensure medium pressure, cutting burrs, and laying flat on the right side. Ensure the smooth and precise cutting length of the slitting machine on the paper, increase the production management of vertical and horizontal cutting machines, constantly monitor the operating status, and pay attention to wallpaper and product defects.