Today, some companies often use the Automatic high-speed pillow sealing and cutting heat shrinkable packaging unit, so the things that need to be paid attention to in the process of use must be paid attention to.

1. In order to prolong the service life of the sealing and cutting blade, the following principles should be followed when adjusting the sealing and cutting time: from low to high, slow. As long as it can meet the sealing and cutting requirements, and the time is as short as possible, it is not allowed to set the time too long or adjust it to a high position at one time, otherwise the sealing and cutting blades and accessories will burn.

2. When the specified voltage of the Automatic high-speed pillow sealing and cutting heat shrinkable packaging unit is 380V three-phase power supply, the neutral line must be inserted at the same time, that is, the standard four-wire three-phase system. Otherwise, the heat shrink packaging machine cannot work normally, and the internal electrical components are easily burned.

3. When the Automatic high-speed pillow sealing and cutting heat shrinkable packaging unit is used continuously for more than three months, the high temperature resistance line of the shrinkable chamber must be checked and replaced according to its aging degree. When the heat shrink packaging machine is working, due to the high surface temperature of the sealing and cutting blades and other heating parts, do not touch with hands or other objects, otherwise there is a risk of sunburn or damage.